BioAdhere™ SUP250

BioAdhere SUP250 two-component bio-based urethane adhesive for engineered wood applications, delivering strong bonds, low VOCs, no odor, and zero microplastics.

BioAdhere SUP250

Polyurethane Adhesive | Two-Component

BioAdhere® SUP250 is a bio-based, two-component polyurethane adhesive engineered to deliver high bonding performance for engineered wood applications. Designed to balance ease of use with professional-grade strength, it provides reliable adhesion without the drawbacks commonly associated with traditional solvent-based urethane adhesives.

With low odor, low VOCs, and no added microplastics, BioAdhere® SUP250 supports improved working conditions while maintaining the durability and bond integrity required for engineered wood products. Its formulation eliminates the need for surface preparation, helping streamline production and installation processes.

SAFETY DATA SHEET
Hardwood flooring angled on a stack
close-up image depicting several wooden planks drying after being glued together in a carpentry workshop. The lingering excess glue seeping from the edges adds a raw authenticity to the scene, showcasing the craftsmanship and dedication involved in every woodworking project
The carpenter glues the bars together and tightens them with powerful clamps low angle view

Designed for Engineered Wood Performance

BioAdhere® SUP250 is formulated specifically to meet the bonding demands of engineered wood, delivering consistent results across a range of applications. Its versatile performance and simplified application process make it well suited for manufacturers and installers seeking efficiency without compromising bond strength.

Advantages

  • 31% Bio-Based
  • Low Odor
  • Strong Bonding
  • Versatile Applications
  • Surface Preparation not Required
  • Low VOC
  • No added Microplastics

Key Benefits

  • Two-component polyurethane adhesive for engineered wood
  • Strong, reliable bonding performance
  • No surface preparation required, reducing labor time
  • Low VOC with low odor, improving working conditions
  • No added microplastics
  • Bio-based formulation aligned with modern material requirements
  • Versatile application across engineered wood uses
Directions For Use

Surface Preparation:

  1. For high strength structural coatings, remove surface contaminants such as paint, oxide films, oils, dust, mold release agents and all other surface contaminants.
  2. Use gloves to minimize skin contact. DO NOT use solvents for cleaning hands.

Mixing Instructions:

  1. For high strength structural bonds, remove surface contaminants such as paint, oxide films, oils, dust, mold release agents and all other surface contaminants
  2. Use gloves to minimize skin contact. DO NOT use solvents for cleaning hands.
  3. Mix Part B into Part A in a 1:1 ratio for 2 – 3 minutes. Then apply via brush or roller.
  4. Static mix tips are needed to adequately mix this class of material when dispensing via continuous operation.
  5. Application to the substrates should be made as soon as possible. Larger quantities and/or higher temperatures will reduce the working time
All Documents