Carbyne™ SUP250
Aliphatic Polyurethane Two Component Protective Coating
Carbyne™ SUP250 is a bio-based, water-based, two-component aliphatic polyurethane coating engineered specifically for garage floor applications. Designed to deliver long-term surface protection in residential and light commercial garages, Carbyne™ SUP250 combines ease of application with professional-grade durability.
Formulated to perform on properly prepared concrete substrates, Carbyne™ SUP250 provides exceptional abrasion resistance, strong adhesion, and long-lasting performance under vehicle traffic, foot traffic, and daily garage use. With low VOCs and no odor, it supports improved indoor air quality during installation—making it well suited for garages attached to living spaces.
Why Carbyne™ SUP250 Over Polyaspartic
While polyaspartic coatings are known for rapid cure times, they often sacrifice working time, adhesion tolerance, and long-term wear performance. Carbyne™ SUP250 is engineered to address those limitations.
Carbyne™ SUP250 offers:
- Longer working time for improved application quality and fewer defects
- More forgiving installation, reducing the risk of lap lines and roller marks
- Strong, consistent adhesion to properly prepared concrete
- Excellent abrasion resistance designed for real-world garage use
- UV-resistant formulation to help maintain appearance over time
Built for Real-World Garage Conditions
Carbyne™ SUP250 is designed to protect garage floors from tire wear, moisture exposure, and surface abrasion. Integrated UV-resistant and anti-corrosion additives help preserve coating integrity and appearance, while matte and gloss finish options provide flexibility in both performance and aesthetics.
Advantages
- USDA BioPreferred® and Intertek Clean Air GOLD certified, helping support LEED credit qualification for low-emitting building materials.
- Better working time than polyaspartic coatings, allowing improved application quality
- More forgiving installation, reducing lap lines, roller marks, and application defects
- Low VOC with no odor, suitable for garages attached to living spaces
- Strong adhesion to concrete
- Excellent abrasion resistance for vehicle and foot traffic
- UV-resistant formulation to help maintain appearance over time
- Durable, long-lasting coating system
- Available in matte and gloss finishes
Key Benefits
- Improved finish quality due to longer working time compared to polyaspartic systems
- Consistent adhesion to concrete, supporting long-term coating performance
- High abrasion resistance designed for vehicle and foot traffic
- Reduced application defects, including lap lines and roller marks
- Durable surface protection that helps extend garage floor service life
- Low odor during installation, suitable for attached garages
- UV-stable performance to help maintain appearance over time
New! Carbyne™ SUP250 Colors
Carbyne™ SUP250 also provides aesthetic flexibility for your Garage Floor without sacrificing performance. Available in a wide range of gloss color options.
Custom colors are available upon request to meet project-specific requirements.
Garage Floors
Directions For Use
Surface Preparation:
- For high strength structural coatings, remove surface contaminants such as paint, oxide films, oils, dust, mold release agents and all other surface contaminants.
- Use gloves to minimize skin contact.
Mixing Instructions for a 5-Gallon Kit:
- MIx Part A well prior to use. For best results use a drill mixer.
- Add Part B to Part A. Scrape out contents of Part B for best results.
- Mix for 2 minutes using a drill mixer.
- Add the required amount of water to Part A (as per label instructions).
- Mix for 2 minutes using a drill mixer.
- Apply with a brush, roller or sprayer.
- Apply coating at 5 – 6 wet mil thickness.
- Coating will be dry to the touch in 10 – 12 hours.
- Full cure in 5 days.
