1 1

BioMelt SPSA500

BioMelt SPSA500

Pre-Production Evaluation Samples
$29.99
$29.99
Sale Sold out
Shipping calculated at checkout.
Sizes

Pressure Sensitive Adhesive for Labels, Stickers, and Product Packaging.

BioMelt™ SPSA500 is a plant-based pressure sensitive adhesive designed for label and sticker applications across packaging, food, beverage, logistics, and consumer products. From water bottle labels and wine bottles to produce stickers, shipping labels, and product packaging, SPSA500 delivers the dependable tack and bonding performance needed to keep labels in place.

Engineered for commercial-scale use, BioMelt™ SPSA500 supports consistent application, strong adhesion, and low odor performance in high-volume production environments. It is a practical adhesive solution for manufacturers looking to improve label performance while incorporating bio-based material content into their packaging systems.

View full details
1 2

  • Ideal Applications

    • Water bottle labels
    • Wine bottle labels
    • Food labels and produce stickers
    • Shipping and logistics labels
    • Product labels
    • Retail packaging labels
    • Box labels
    • Branded stickers

  • Key Benefits

    • Pressure sensitive adhesive for label applications
    • Strong tack and dependable bond strength
    • Designed for high-volume packaging and labeling operations
    • Made with plant-based content
    • Low odor during application
    • Supports consistent label placement and hold
    • Suitable for food, beverage, logistics, and consumer product labeling

MORE INFORMATION

Directions for Use

Surface Preparation:

  1. For high strength structural coatings, remove surface contaminants such as paint, oxide films, oils, dust, mold release agents and all other surface contaminants.
  2. Use gloves to minimize skin contact.

Mixing Instructions for a 5-Gallon Kit:

  1. MIx Part A well prior to use. For best results use a drill mixer.
  2. Add Part B to Part A. Scrape out contents of Part B for best results.
  3. Mix for 2 minutes using a drill mixer.
  4. Add the required amount of water to Part A (as per label instructions).
  5. Mix for 2 minutes using a drill mixer.
  6. Apply with a brush, roller or sprayer.
  7. Apply coating at 5 – 6 wet mil thickness.
  8. Coating will be dry to the touch in 10 – 12 hours.
  9. Full cure in 5 days.

All Documents

FAQs